Printing is possible after 2021, but the scope for the Christian Calendar in parameter setup mode is up to 2020, so it cannot be changed after 2021.
If the parameters are cleared or the AD is incorrectly changed after 2021, the following procedures are required to set to the Christian Calendar, we appreciate your understanding and cooperation.
overview
[Step 1] Set the month, the day, time, and minutes to 12/31 23:59.
* When the first step 1 is 1, set the year to 2020.
[Procedure 2] Waiting 1 minute to 1/10:00 the following year.
* Depending on the Christian calendar, it is necessary to repeat steps 1 and step 2 to pass one year.
[Step 3] Set the current month, day, time, and minutes.
[Step 1] Set the clock on 12/31 23:59.
(1) When the power is turned off, press the "Power" key while pressing the "Data" key to make it parameter setup mode.
* This is an example when changing from 2000/3/22 13:05.
(2) Press the "Data" key 13 times and proceed to the date setting.
(3) Set the year, month, and day to December 31, 2020.
* The setting of the AD is the operation that is required only when set to the first 2021.
(Example of key operation 2/3/23 to 2020/12/31)
① Press the "Printer" key to 2020. * Operation only for the first time
② Check with the "Stat" key. * Operation only for the first time
[YYYY/MM/DD 2020/3/23]
③ Press the "CL" key to 12.
④ Check with the "Stat" key.
[Yyyy/mm/DD 2020/12/23]
⑤ Press the "CE" key to 31.
Check with the "stat" key.
[YYYY/MM/DD 2020/12/31]
⑦ Migrate to the "Data" key time.
(4) Set the time to 23:59.
(Example of key operation example 13:05 to 23:59)
① Press the "Printer" key to 23.
② Check with the "Stat" key.
[HH: MM: SS 23: 5: 0]
③ Press the "CL" key to 59.
④ Check with the "Stat" key
[HH: mm: SS 23: 59: 0]
⑤ Press the "Data" key twice and pass through the parameter setup mode.
[Step 2] Waiting for 1 minute change the year.
(1) Wait for 1 minute.
(2) Make sure that the year is one year old with the "PRINTER" key "Data" key.
* If you want to set it after 2022, do not change the year and repeat steps 1 and step 2.
* If you perform the year after this, it will return to 2000, so please do not perform the year.
[Step 3] Set the current month, day, time, and minutes.
(1) When the power is turned off, press the "Power" key while pressing the "Data" key to make it parameter setup mode.
(2) Press the "Data" key 13 times and proceed to the date setting.
(3) Set the month and the day.
(Example to change from 1/1 to 3/23 of key operation on the screen)
① Press the "CL" key required.
② Check with the "Stat" key.
[Yyyy/mm/dd 2021/3/1]
③ Press the "CE" key required.
④ Check with the "Stat" key.
[YYYY/MM/DD 2021/3/23]
⑤ Migrate to the “Data” key time.
(4) Set the time.
(Example of key operation on the screen 0:02 to 8:24)
① Press the "Printer" key.
② Check with the "Stat" key.
[HH: mm: SS 8: 2: 0]
③ Press the required number of "CL" key.
④ Check with the "Stat" key.
[HH: mm: SS 8: 24: 0]
⑤ Press the "Data" key twice to complete the parameter setup mode.
Note
If you set the year after 2020 AD, you will return to 2000.
If you accidentally operate, you need to re -do this work.